What are the reasons that affect the temperature changes of the crimping machine? There are many opinions in the industry that "sufficient cleanliness of the welding surface, sufficient welding temperature, reasonable welding angle, reasonable soldering material, reasonable soldering amount, and low temperature and low humidity storage environment will all affect the temperature changes of the automatic crimping machine.".
If the automatic crimping machine is a tin cup type automatic soldering machine, the rise and fall of the small tin cup during soldering will cause temperature changes; In addition, when there is a large amount of solder, the temperature drop will be more significant; In addition, the function of the temperature controller. If it is controlled by SSR, if the temperature detection cycle is within 20 seconds, the temperature will change greatly. It is good to change the detection cycle to 2 seconds; If it is SCR control, stabilizing the low output power above 20% can avoid significant temperature changes.
Automatic crimping machine welding technology is an operation method that uses welding materials (welding rods or wires) to connect two or more base materials (workpieces to be welded) into a whole under high temperature or high pressure conditions. Welding is a machining process and connection method that uses heating, pressure, or a combination of both to create atomic bonding between two workpieces of the same or opposite sex. Automatic crimping machines are widely used, both for metals and non-metals.
