A crimping machine is a hydraulic equipment used to crimp a pipe assembly. It applies a contraction force to the metal joint through the mold of the crimping machine, firmly crimping the metal joint onto the high-pressure oil pipe used in engineering machinery or the brake pipe, oil pipe, air conditioning pipe, and power pipe of a car. The crimping machine is suitable for crimping various mechanical high and low pressure oil pipes, gas pipes, water pipes, cable joints, automotive air conditioning pipes, automotive power steering pipes, oil pipes, gasoline supply pipes, as well as building accessories and daily hot water pipes. It is widely used in industries such as vehicles, engineering machinery, hydraulic machinery, welding and cutting equipment.
Operation
1. Add 50kg of 46 # hydraulic oil at once (preferably genuine original oil).
2. Positioner installation: First, insert the locator into the front end of the machine head (note: the locator can be directly inserted into the machine head), and then plug the other end into the corresponding socket on the inside of the electrical control box.
3. Connect the power supply. If you are using a three-phase motor, be careful not to connect it in reverse (top view: the clockwise direction of the motor fan indicates positive rotation).
4. After the above processes are completed, the machine can be turned on for pressure testing.
5. The use of locator: Press an additional 1mm for each reverse rotation, 0.01mm for each forward rotation, and so on. For the same specification of rubber hose and joint, the first metal joint reaches the required pressure without the need to move the locator. Keep pressing the same specification all the time, and the compression data is completely consistent. When you complete the first oil pipe pressure test, you have learned it, and the rest is gradually becoming proficient.