Terminal crimping machine is a necessary tool for continuous wire crimping in the basic construction and maintenance of power lines in the power industry. Insulation terminal crimping machine is a type of crimping machine. Below we will introduce the maintenance of the ultra quiet terminal crimping machine.
Daily maintenance:
1. The stamping guide rail of the ultra quiet terminal machine in the crimping machine must be lubricated with engine oil on the top of the terminal machine every day, with 2-3 drops of oil added each time, preferably not too much;
2. Operators must clean the machine every day to remove dust, debris, and excess oil stains from the surface of the machine;
3. The main speed bearing of the terminal machine must be lubricated with grease every week. The specific operation method is as follows:
<1> (Open the back cover of the terminal machine → Remove the driven pulley snap ring → Remove the pulley → Apply butter evenly on the surface of the high-speed bearing) → Restore (Note: During the disassembly of the pulley, pay attention to the loss of bearing balls)
Level 2 maintenance: After using the terminal machine for 3-6 months, it is necessary to check whether each component (consumable parts) needs to be replaced, such as the belt, and whether the springs of each component have weakened elasticity and need to be replaced. Check whether the locking screws of the machine are loose and whether the snap ring is deformed.
The above is the daily maintenance knowledge about ultra quiet terminal crimping machines introduced by the editor of crimping machines. If you are interested, you can take a look!